Dimensions Foot/ Lbs Meter/ Kg
LOA 31.20 9.51
LWL 28.40 8.66
Beam 10.00 3.05
Standard Draft 3.0/5.5 .92/1.68
Standard Ballast 2,450 1,111
Displacement 6,000 2,722
Engine 14 hp 14 hp
100% SA 450 41.8
I 36.60 11.16
ISP 41.62 12.69
J 11.00 3.35
P 36.60 11.16
E 13.00 3.96
SA/Dspl 22 22
Dspl/L 117 117


J/95 Specifications- June 1st, 2017
Hull & Deck Construction

Hull and deck built with resin infusion molding system using biaxial and unidirectional glass fabrics and Baltek end-grained balsa and foam cores.

Structure is engineered to ABS and ISO standards.

10 year transferable warranty against hull blistering, 5 year structural warranty.

GRP molded structural grid with longitudinal and transverse keel support beams and composite mast bearing beam with aluminum tapping plate.

White gel coat hull with single tapered boot stripe.

Two large cockpit seat storage lockers.

Swimming and boarding platform with integral safety telescoping ladder.

GRP molded main structural bulkhead, bonded to hull and deck as support for shroud chainplates with single opening to head and forepeak.

Keel & Rudder

Fixed 2,250 lb lead keel bolted and bonded to shallow molded sump in hull.

Pivoting 200 lb. cast bronze centerboard.

Fully removable centerboard shim system assembly with custom SS plates, pivot pin, and mechanically fastened UHMW shim plates.

Centerboard lifting system with Spectron Pennant from Hall Rigging, 6:1 Harken purchase leading through the deck to the cockpit for an adjustable sailing draft between 3’ and 5.5’.

Interior access port to centerboard lifting components within head area.

Balanced twin rudder system with self-aligning rudder bearings and SS rudder shafts.

Edson steering components including bulkhead steerer, radial drive, tiller arm, link bar, articulock idler sheaves and wire chain assembly.

44” leather covered wheel mounted on custom molded steering pedestal.

Ritchie binnacle mounted compass and custom fabricated SS wheel guard/handhold.

Custom fabricated emergency tiller.

Spars & Rigging

Hall Spars tapered aluminum mast, with double airfoil aluminum spreaders, main, jib & spinnaker halyard sheaves, luff track integral to section with mast finished in off-white Awlgrip.

G10 fiberglass mast step with fore/aft adjustment slots and SS padeye for through bolt securing of mast to step.

Molded mast wedge system

Aluminum boom with provision for 2 reefs, 8:1 internal mainsail outhaul in Awlgrip off-white.

Continuous rod rigging with adjustable shroud turnbuckles.

Sailtec integral -8 hydraulic backstay adjuster.

Rigid boomvang with purchase

Headsail furler with control leading aft through 2 fairleads to cam cleat mounted on port cabin side.

Bowsprit prep package – internal fiberglass sprit tube installed with flush cover. Optional asymmetric spinnaker gear package includes carbon sprit, bearings, retrieval purchase, blocks and running rigging.

Complete running rigging package

Deck Hardware

Off-white ORC foredeck toe rails (Option for varnished full length teak rails).

Low maintenance custom stainless handrails on cabin house (P&S).

Self-tailing winches mounted on cockpit coamings (P&S).

Self-tailing winches mounted beside companionway (P&S).

Triple deck organizers (P&S).

Two winch handles.

Two winch handle holders shipped loose

Custom stainless fabricated mast collar with halyard attachment bar.

6 mast collar turning blocks

Two pin stop cars on jib T-tracks with cheek blocks mounted on cockpit coaming forward of winches.

Floor mounted mainsheet traveler track with 4:1 traveler control system leading to cockpit vertical wall to cam cleats (P&S).

5:1 Mainsheet purchase system leading to swivel cam base on a custom SS riser mounted on centerline aft of the traveler.

10:1 fine tune adjustment system.

Four 8” SS mooring cleats.

Interior ventilation from two opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth. (option for 2 add’l cockpit opening ports).

Companionway opening with SS covered PVC slider tracks, large gutter drains, molded seahood with sliding cover.

Acrylic offshore removable drop-board with inside/outside lockable hasp.

Cockpit operated manual bilge pump operable from the helm position with SS transom exhaust fitting.

Two polypropylene mesh line bags for halyard and sheet line tail storage.

Custom designed and fabricated SS chainplates, stemhead and backstay fittings.

Four folding padeyes for attachment points of spinnaker blocks.

Custom SS bow and stern rails with integral navigation lights.

SS removable stanchions with double lifelines P&S and at transom.

Auxiliary Power

14 HP engine with saildrive and 15” geared folding propeller.

Engine instrument panel with tachometer, engine hour gauge and water, oil pressure alarms and separate fuel gauge in cockpit with acrylic splash cover.

Engine throttle control with neutral safety switch.

Waterlock muffler with exhaust run aft to SS transom exhaust fitting.

15 gal fuel tank with baffles & inspection port.


Manual & Electric bilge pumps

One AGM Group 27 battery (option for 2nd battery)

12V DC On/Off battery switch.

12V DC electrical distribution panel w/ 8 circuit breakers.

Navigation & steaming lights.

UL approved stranded, tinned copper ABYC color-coded wiring.

Bonding system to meet ABYC regulations.

Two swiveling reading lights in main cabin.

Two red/white dome lights

Automatic electric bilge pump and panel switch for manual operation.


Off White main bulkhead with varnished teak trim, teak oval door opening with white door.

Teak and holly synthetic high-wear cabin sole in main cabin and head.

Teak trimmed storage bins outboard of each settee berth seat back.

Igloo Cooler

Raritan PH-II marine head with 14 gal holding tank and "Y" valve.

Molded sink with overboard drain in head.

Choice of fabrics for settee cushions.

Vinyl liner finish on main cabin & head overhead and main cabin hull sides. Air dry gelcoat finish on hull sides in head and V-berth area and aft storage lockers.


Two Tone Deck w/ contrasting non-skid color

Full length teak toe rail in lieu of standard, with custom mid-ship chocks, scupper drains and finished with gloss-varnish.

(2) Add’l cockpit opening portlights P & S.

Lifeline Gates P & S.

Removable Transom Locker.

Thurston Dodger with side curtains.

V-Berth Package: V-berth cushions and swiveling reading lamp.

Pressure water system with 20 gallon bladder tank, water pressure pump, faucet in head and cold water cockpit shower.

Heat exchanger water heater to run off engine only: (Requires Pressure water option).

110V Shore Power: 30amp shore power cord, deck receptacle, belowdecks breaker, Xantrex battery charger, AC panel, one 110v outlet in nav panel, equipment leakage circuit interrupter (ELCI), galvanic isolator.

Forte Carbon Mast in lieu of standard with Harken Type A mast track.

Asymmetric Spinnaker Package: retractable carbon fiber bow sprit, sprit bearings, one spinnaker halyard, two spinnaker sheets, tack line, retrieval purchase, and five Harken blocks.

Additional Battery

Notice Specifications are subject to change prior to delivery due to deletions, additions or revisions in quantities, brand or design at the sole discretion of J/Boats, Inc. Newport, RI.